Table des Matières
Publicité
WARNING
Disconnect the electrical supply before servicing or cleaning the vacuum cleaner.
Failure to do so could result in electrical shock or personal injury from vacuum
cleaner suddenly starting.
Lower Plate
Plaque
inférieure
Base inferior
Two Screws
Deux vis
Dos tornillos
Electrical Shock or Personal Injury Hazard
Removing and Installing Lower Plate
Latches
Loquets
Lenguetas
CAUTION
Moving parts! To reduce the risk of
personal injury, DO NOT touch the
agitator when vacuum cleaner is on.
Contacting the agitator while it is
rotating can cut, bruise or cause
other injuries. Always unplug from
electrical outlet before servicing.
Use caution when operating near
small children.
➢ Before servicing any parts,
disconnect vacuum cleaner from
electrical outlet.
➢ Place paper under nozzle anytime
lower plate is removed to protect
floor.
➢ Place handle in upright position and
turn vacuum cleaner over to expose
lower plate.
➢ Remove two (2) screws and press
latches downward to release lower
plate.
➢ Remove lower plate and remove any
residue that may exist in belt area.
➢ Reinstall lower plate by hooking front
end of lower plate into slots on front
of nozzle housing.
➢ Press lower plate into place, snap
latches into place, and reinstall two
(2) screws.
- 26 -
Publicité
Table des Matières
