Emerson DUO CF560BS00 Mode D'emploi page 9

4.3
Orientate the Ceiling Trim Ring, as shown in Figure 7.
Position the Fan Motor Assembly Wires through the center
hole of the Ceiling Trim Ring.
Slide the Ceiling Trim Ring over the Fan Motor Assembly
and let it rest on the Fan Motor Assembly (Figure 7).
4.4
NOTE: To Avoid Fan Motor Assembly from Falling:
Do NOT place the Ceiling Mounting Plate Hook
through the Fan Motor Assembly Slotted Holes.
Securely place the Fan Motor Assembly onto the Ceiling
Mounting Plate Hook by passing the Hook through the Fan
Motor Assembly Full Hole, as shown in Figure 8.
NOTE: The opening of the Receiver is located near the
hook.
CEILING
TRIM RING
FAN MOTOR
ASSEMBLY
Figure 7
FAN MOTOR
ASSEMBLY
SLOTTED
HOLES (2)
FULL
HOLES (2)
Figure 8
Please contact 1-800-654-3545 for further assistance
9
CEILING MOUNTING
PLATE
CEILING MOUNTING
PLATE HOOK
RECEIVER
OPENING
emersonfans.com
U.L. Model No.: CF560