Emerson DUO CF560BS00 Mode D'emploi page 14

6.5
LED LIGHT FIXTURE INSTALLATION:
Tuck wires into the LED Light Fixture Assembly and
position in the Lower Housing Assembly.
Attach the LED Light Fixture Assembly to the Lower
Housing by rotating the LED Light Fixture Assembly
clockwise to engage the loosened screws in the two LED
Light Fixture Assembly Keyhole Slots (Figure 17).
Reinstall and tighten the 8-32 x 5/16" Pan Head Screws
that was previously removed (Figure 17).
Secure the LED Light Fixture Assembly by tightening the
two previously loosened 8-32 x 5/16" Pan Head Screws
(Figure 17).
A spare 8-32 x 5/16" Pan Head Screw supplied in parts
bag, if needed.
WARNING
!
To avoid possible fire or shock, do not pinch wires
between the lower housing and the LED light fixture
assembly.
6.6
Place the Shade into the opening in the Lower Housing,
aligning the three Flat Areas on the top edge of the Shade
with the three raised Dimples on the Lower Housing and
turn the Shade clockwise until it stops (Figure 18).
NOTE: Periodically check that the Shade is seated
fully clockwise in the Lower Housing.
Please call Emerson
1-800-654-3545 if you
about installation and operation of this ceiling fan.
6. Final Assembly
technical support
have any questions
(Continued)
Figure 17
at
Figure 18
14
U.L. Model No.: CF560