walser COOLHEAT Mode D'emploi page 9

Notice
Risk of damage!
Improper handling of the seat pad can lead to damage of the seat pad.
→ Do not use blankets, pillows or covers on the seat pad.
→ Do not allow the connection cable to come into contact with hot parts.
→ Never expose the seat pad to high temperature (heating, etc.) or the influence of weather (rain, etc.).
→ Do not immerse the seat pad in water for cleaning and do not use a steam cleaner for cleaning.
→ Do not use the seat pad if it has cracks or tears or has become deformed. Replace damaged parts only with
appropriate original spare parts.
→ Do not stick any needles or pointed objects into the seat pad.
→ To avoid overheating, do not expose the seat pad to heat sources, naked flames, such as candles or direct sunlight.
→ During operation, make sure that the 12V plug is securely plugged into the 12V power supply socket and
is free from dirt. If there is insufficient contact between the plug and the 12V power supply socket, the vibra-
tion of the vehicle can cause the power supply to be switched on and off at short intervals. This can lead to
overheating.
→ Do not switch the seat pad on when it is in folded or pressed together.
→ Do not place heavy objects such as suitcases on the seat pad.
5. Use
Warning
Risk of injury!
Improper handling of the seat pad may cause personal injury or damage to the seat pad.
→ Before set-up, make sure that the 12V plug and the connection cable are dry.
→ Switch off the seat pad immediately if any pain is experienced.
→ Do not bend or fold the seat pad and keep it away from water and other liquids.
→ Do not use the seat pad near naked flames or other sources of heat such as strong sunlight.
→ Check the seat pad regularly for wear and tear. If such signs are present, or the seat pad has been impro-
perly used or is no longer functioning, do not use it any more. Return the seat pad to the dealer.
5.1 Fitting the seat pad
Warning
Risk of injury!
Incorrect mounting of the seat pad can lead to injuries.
→ Fasten the seat pad and connecting cables so that the driver's freedom of movement is not restricted.
• Place the seat pad [FIGURE
• Make absolutely sure that the seat pad does not cover or obstruct an airbag.
• Pull the two rubber bands between the seat back and seat base [FIGURE
• Fix the seat pad by attaching the upper rubber band to the headrest and positioning the lower two rubber bands as
shown [FIGURE ].
3
• Ensure that the connection cable is not pinched anywhere.
• Do not use force when mounting.
5.2 Operating the seat pad
Only use the seat pad when the engine is running.
• Plug the 12V plug into the 12V power supply socket.
• Select the desired program [FIGURE
• „Vibration" massage function
• „Cool Air" cooling function
• „Heat" heating function
• Turn off the seat pad by pressing the "Power" button.
Warning
Risk of injury!
Objects in the integrated pocket that are too heavy can cause injury.
→ Only place items with a maximum total weight of 250g in the integrated pocket [FIGURE
] on the car seat.
1
].
4
].
2
].
5
9