Knick Protos 3400 Mode D'emploi page 23

Software Version
Query Actual Device/Module Software
When the analyzer is in measuring mode:
• Press menu key. "Menu selection" is displayed.
• Select diagnostics menu.
• Select "Device description".
Menu Display
Menu selection
Return to meas
Diagnostics
Message list
Logbook
Device description
Module FRONT
Module BASE
Module PH 3400-035
Return
Device description
Module FRONT 3400-011
Operating panel
Hardware: 2, Software: A.2
Serial number: 3130815
Module
Return
Device description
Module PID 3400-121
Controller, contacts
Hardware: 1, Software: 1.1
Serial number: 471101147
Module
Return
PID 3400(X)-121
7.02 pH
23.7 °C
Select: [enter]
Lingua
7.02 pH
23.7 °C
Set favorite
7.02 pH
23.7 °C
FRONT BASE
Options
7.02 pH
23.7 °C
FRONT
BASE
Options
Device Description
Select menu: Diagnostics
From the measuring mode:
Press menu key to select menu.
Select diagnostics using arrow keys,
press enter to confirm.
Diagnostics: Device description
Select using arrow keys,
press enter to confirm.
Device Description
Provides information on all modules
installed.
Query hardware and software
version
Select the different modules (FRONT,
BASE, slots 1 - 3) using the arrow keys.
When the module has been selected,
the function, hardware and software
version, serial number and the physi-
cal slot occupied in the device.
23