Before First Use - tepro ODESSA Instructions D'utilisation

Table des Matières

Publicité

Les langues disponibles
  • FR

Les langues disponibles

  • FRANÇAIS, page 30
Danger
Fire hazard!!
To prevent the device from
overheating and causing a fire,
the device may not be covered up.
– The device remains hot for some time
even after being switched off. Take
care not to burn yourself and do not
place any objects on the grill. This pos-
es a fire hazard.
Danger
Risk of burning!!
This electric BBQ becomes
very hot during use. To prevent
burning, never touch the hot surfaces with
your bare skin. Touch the device only on
its heat-insulated handles (2).
– Keep a minimum distance of 1 m to
flammable materials such as wallpa-
per, curtains and blinds.
– Be attentive at all times and pay atten-
tion to what you are doing. Do not use
the device when you are lacking con-
centration or tired or under the influ-
ence of drugs, alcohol or medication.
Just one instant of carelessness while
using the product can lead to serious
injuries.
9L-Tepro_ElectricBBQ_4040_A5_10292012_A120536.indb 25
GB

Before first use

1.
Clean the grill plate and collection
tray as described under Cleaning
and care.
2. Place the device on an even, dry
and nonslip surface. The device is
outfitted with nonslip rubber feet (1)
to guarantee stable footing.
3. Use a heat-resistant surface when
operating the device.
4.
Insert the collection tray (3) into the
device until it clicks into place.
5. Spread a thin layer of vegetable oil
on the grill plate (4).
6. Turn the temperature knob counter-
clockwise to 0.
7.
Connect the connection plug (7) on
the temperature knob (8) to the jack
(6) and the power plug (10) to an ap-
propriate power outlet.
8.
Set the temperature knob (8) to level 5.
The indicator lamp (9) lights up and
the device begins heating. Heating
takes about 5 minutes. As soon as
the device is heated, the indicator
lamp goes out.
9.
Let the device heat for about 10 min-
utes without foodstuffs to burn away
production residue.
10. When used for the first time, a small
amount of smoke and an odor may
occur. This is a normal process
caused by the burning of production
residue. Both the smoke and the
odor will vanish shortly. Make sure
the room is sufficiently ventilated.
11. The device is ready for use.
25
30/10/12 10:12 AM

Publicité

Table des Matières
loading

Ce manuel est également adapté pour:

4040n4040-ch

Table des Matières