Playing Back Ipod - JVC TH-LB3-B Manuel D'instructions

Système home cinéma
Table des Matières

Publicité

Les langues disponibles
  • FR

Les langues disponibles

  • FRANÇAIS, page 38
Operations
(continued)

Playing back iPod

Connecting iPod
While the power is turned off...
1
Push the tray (8) to open the dock for iPod.
2
Connect iPod to the connector.
You cannot connect iPod to the unit if it is covered by something
or with accessories attached. Remove them before connecting.
Keep iPod in a straight position while connecting/disconnecting
it.
Do not carry the unit with iPod connected. It might cause
damage to the dock for iPod or you might drop iPod.
Do not touch or hit the iPod terminal pins or connector pins in
the dock for iPod directly. Doing so might cause damage to the
connector pins.
While the power is turned on, or during Standby with HDMI Pass
Through ON, iPod can be charged.
Playing back
Press iPod 6.
While the power is turned off, simply pressing iPod
on the power and plays back iPod.
Pausing/resuming playback
Press iPod 6.
Skipping forward/back
Press and hold ¢ or 4.
Skipping to the next track
Press ¢.
iPod (not supplied)
6 turns
9
Skipping back to the previous track
Press 4 twice or more repeatedly.
Returning to the beginning of the track
Press 4 once.
Putting iPod in sleep mode
Press and hold iPod 6.
Displaying a menu/Returning to the
previous menu
Press MENU.
Selecting an item on the menu
Press UP or DOWN, then press SELECT.
NOTES
Operate iPhone or iPod touch itself in the following cases:
When operating the home button.
When selecting application icons on the home screen.
When dragging the slider.
Sound distortion may occur when playing back audio sources with
high recording levels. If distortion occurs, it is recommended to turn
off the equalizer of iPod.
You can select the video signal format (NTSC or PAL) in the setting
menu on iPod.

Publicité

Table des Matières
loading

Ce manuel est également adapté pour:

Th-lb3-w

Table des Matières