Music Playback Via Aux In - SilverCrest SKHO 40 A1 Mode D'emploi

Table des Matières

Publicité

Les langues disponibles
  • FR

Les langues disponibles

Accepting/ending/rejecting a call
NOTE
If you are listening to music and receive a call, you will hear
the ringtone in the headphones and playback is stopped. After
finishing the call, playback will be resumed automatically.
You can accept/reject calls via the headphones or your smart-
phone. The sound is automatically played back through the
headphones.
Press 1 x briefly (for incoming call)
Press 1x briefly (during call)
Press and hold for approx. 2 seconds (for
incoming calls)

Music playback via AUX IN

You can use the supplied audio cable
to non-Bluetooth
the headphones behave like normal, cable-connected headphones
and can even be used with an empty battery. The Bluetooth
function is deactivated and the buttons on the
headphones do not function.
Make sure that the headphones are switched off.
Connect the audio cable
headphones.
Connect the audio cable
phone jack) on the playback device.
Switch on the playback device and set the volume to minimum.
Put on the headphones as described in the section Wearing
the headphones.
Set the desired volume on the playback device.
SKHO 40 A1
Button
-compatible playback devices. In AUX IN mode,
®
4
w
to connect the headphones
w
to the AUX IN socket
w
to the audio output (e.g. head-
GB │ IE │ NI
Function
Accept call
End call
Reject call
®
7
of the
 15

Publicité

Table des Matières
loading

Table des Matières