Sunred GH12 Serie Mode D'emploi page 31

PARTS AND SPECIFICATIONS
A. Construction and characteristics
•
Transportable terrace/garden heater with tank housing.
•
Casing in steel with powder-coating or in stainless steel.
•
Gas hose connections with metal clamp (screw caps for Germany). Heat emission from reflector.
B. Specifications
•
Use propane, butane or their mixtures gas only.
•
Max. wattage: 14000 watts
•
Min. wattage: 5000 watts
•
Consumption:
APPLIANCE CATEGORY:
TYPES OF GAS:
GAS PRESSURE
OUTLET PRESSURE
OF REGULATOR:
Gebruik de juiste regelaar in overeenstemming met de uitlaatdruk van de regelaar zoals aangegeven in de bovenstaande tabel.
APPLIANCE CATEGORY:
TYPES OF GAS:
GAS PRESSURE
TOTAL HEAT
INPUT
INJECTOR SIZE
1.90 mm for main burner
0.18 mm for pilot burner
De markering, bijvoorbeeld 1,90 op de injector, geeft aan dat de grootte van de injector 1,90 mm is.
C. Table of injector
•
The hose and regulator assembly must conform to local standard codes.
•
Regulator outlet pressure should meet the corresponding appliance category in B. Specification.
•
The appliance requires approved hose in 1.4m length.
A regulator (compliees with EN16129:2013 and the national regulation) of the correct pressure corresponding to the appliance category.
Use 30mbar regulator for butane/propane under the category I3B/P(30). Use 30mbar regulator for butane under the category I3+(28-30/37).
Use 37mbar regulator for propane under the category I3+(28-30/37).
I3+(28-30/37)
Butane Propane
28-30 mbar 37 mbar
30 mbar 30 mbar
I3+(28-30/37)
Butane Propane
28-30 mbar 37 mbar
I3B/P(30)
Butane, propane or
their mixtures
30 mbar
30 mbar
I3B/P(30)
Butane, propane or
30 mbar
14 kW (1000 g/h)
1.70 mm for main burner
0.18 mm for pilot burner
I3B/P(50)
Butane, propane or
their mixtures
50 mbar
50 mbar
I3B/P(50)
Butane, propane or
50 mbar
NL
NL
30