Problems Check Test - Sunred GH12 Serie Mode D'emploi

PROBLEMS CHECK LIST
PROBLEM
Pilot will not light
Pilot will not stay on
Burner will not light
If the appliance is in case of any defaults or problems of assembly or use Please don't try to modify it by yourself contact your supplier or
distributor to solve it.
PROBABLE CAUSE
Gas valve may be OFF
Tank fuel empty
Opening blocked
Air in supply system
Loose connections
Debris around pilot
Loose connections
Thermocouple bad
Gas leak in line
Lack of fuel pressure
Pressure is low
Opening blocked
Control not ON
Thermocouple bad
Pilot light assembly bent
Not in correct location
SOLUTION
Turn the gas valve ON
Clean or replace opening
Refill LPG tank
Purge air from lines
Check all fittings
Clean dirty area
Tighten connections
Replace thermocouple
Check connections
Tank near empty. Refill LPG tank.
Empty bottle. Fill
Remove and clean
Turn the switch
Replace the thermocouple
Position correctly
Position correctly and try again
EN
19