Sunred GH12 Serie Mode D'emploi page 18

ASSEMBLY
Step 11
11-1. Bring up the tank housing and
rest it on the post plate.
11-2. Connect the end thread of
inlet gas hose to the regulator.
11-3. Connect the regulator to the
gas tank and tighten it with adjusta-
ble wrench.
11-4. Put LPG gas tank on the stand.
11-5. Fasten cylinder with propane
tank strap.
LL
WARNING
Make sure the hose does not touch
hot surfaces. The pipe may melt and then
run away and cause fire. Secure the gas
bottle with theheadband.
NOTE
Make sure the hose does not do not
touch hot surfaces. The pipe can melt
and then flee and cause fire. When the
regulator is put into the heater, fix the
bottle with the headband.
.
EN
17