Sony FD Trinitron WEGA KV-29FQ85E Mode D'emploi page 24

Erasing a learned function
1
Press and hold the
a
AUX green light flashes (see fig. 7).
2
While pressing the % button, press the button (a - g) with the learned
function that you want to erase.
b
3
If you wish to store a new function, repeat steps 3 and 4 from the
g
c previous page, otherwise press the
operation.
d
Erasing all the learned functions in one time
1
e
Press and hold the
AUX green light flashes (see fig. 7).
2
While pressing the % button, press
functions.
f
t
button for approximately six seconds until the
All the four lights illuminate at the same time (see fig. 8) and as
soon as the learned function is erased, the AUX green light starts
flashing (see fig. 9).
t
button for approximately six seconds, until the
All the four lights illuminate at the same time (see fig. 8) and as
soon as all the learned function are erased, the remote control
automatically returns to the normal operation.
t
button to return to normal
t
to erase all the learned
fig. 7
MODE
fig. 8
MODE
fig. 9
MODE
Additional Information
6 sec.
GB
25