Xylem JABSCO 17860-2012 Mode D'emploi page 3

W A R N I N G
W A R N I N G
W A R N I N G
KEY
For quicker oil changes, start engine and run for
1
5 minutes to heat the oil.
Remove the dipstick and insert the suction
2
probe.
Attach the power cord clips to the engine's
3
battery: Red = Positive, Black = Negative
Activate pump with switch on motor to drain
4
crankcase.
2
Key
1
2
3
4
THE PRODUCTS DESCRIBED HEREIN ARE SUBJECT TO THE JABSCO ONE YEAR
LIMITED WARRANTY, WHICH IS AVAILABLE FOR YOUR INSPECTION UPON REQUEST.
Explosion hazard. Motor switch must be in"OFF"
position when connecting and disconnecting alligator
clips to battery terminal and ground. The switch in an
"ON" position can cause an electrical spark which can
result in explosion. Injury or death can occur.
Explosion hazard. Take necessary precautions to
ventilate area around battery of potentially explosive
gases.Continue ventilation during oil changing
procedure. Failure to do so can result in explosion.
Injury or death can occur.
Burn Hazard. Heated oil can cause burns.
Wear protective gloves, clothing and safety glasses
during the oil change process. Failure to do so may
result in personal injury.
4
Description
Cap
Pump12V
Tank
Hose
1
3
Qty. Part Number
1 17864-0000
1 17869-2012
1 17866-0000
1 17867-0000