English
If no key is pressed, the thermometer
will automatically return to measuring
mode after approx. 15 seconds.
Control LED red --> heating on
Control LED green --> heating off
4.2 Display
temperature
The maximum temperature reached since
switching on the contact thermometer will
be saved automatically.
Press the »MAX« key. The display will
show the maximum temperature and two
triangles pointing down.
To return to measuring mode, press the
»MAX« key again.
To cancel the saved value,
•
press the »SET« key or,
•
turn off the power supply.
4.3 Switching off the contact
thermometer
For
switching
thermometer, the power supply must be
turned off.
of
maximum
off
the
contact
Français
Si vous n'appuyez sur aucune touche,
l'appareil se met en mode mesure
après environ 15 secondes.
Control LED rouge --> chauffage allumé
Control LED vert --> chauffage éteint
4.2 Affichage de la tem-
pérature maximale
La température maximale mesurée depuis
la mise en marche du thermomètre à
contact est enregistrée automatiquement.
Appuyez sur la touche »MAX«. Sur
l'affichage apparaissent la température
maximale et deux triangles inversés.
Si vous voulez retourner au mode mesure,
appuyez de nouveau sur la touche « MAX ».
Si vous voulez annuler la valeur enregistrée,
vous devez
•
appuyer sur la touche »SET« ou
•
couper l'alimentation électrique
4.3 Arrêt du thermomètre à
contact
Pour arrêter le thermomètre à contact, vous
devez couper l'alimentation électrique de
l'appareil.
15