Repeat Function; Program Function - THOMSON RK200DABCD Mode D'emploi

REVERSE/FORWARD
1. The and
high speed.
2. Press the button once to hear the beginning of the current track. Press it two or more times to
hear previous tracks on the disc.
3. Press the button to hear the next tracks on the disc.
4. Press and hold the
previous track(s); when the desired track section is found, release the button and normal play will
resume.
5. Press and hold the
track(s). When the desired track section is found, release the selected button and normal playback
will resume.

REPEAT FUNCTION

The CD REPEAT button may be used to repeat a single track or repeat all tracks on a compact disc.
1. Press the REPEAT button once during playback, the "REPEAT ONE" sign will appear on the LCD
display for about 2 seconds. The same track will be repeated over and over.
2. Press the REPEAT button a second time to repeat all tracks. The "REPEAT ALL" sign will appear
on the LCD display for about 2 seconds.
3. To cancel REPEAT PLAY, press the REPEAT button repeatedly until "REPEAT OFF" appears on
the LCD display for about 2 seconds.

PROGRAM FUNCTION

The Program feature may be used to program up to 20 tracks to play in a selected order.
1. While in the stop mode only (CD is not playing), press the PROG button, and the LCD display will
show the wording "P 01" and "T 01" Prog starts to flash.
2. Press the and
3. Press the PROG button to select and store the track into memory.
4. Repeat steps 2 to 3 to select up to 20 tracks.
5. To play the selected tracks (in the program mode), press the
6. Press the button to hear the previous program track or press the
program track.
Note: After all programmed tracks have been played, the CD player will return to the stop mode.
7. Press the button to exit the PROGRAM PLAY mode.
MP3 DISC SECTION
1. Press the POWER button to turn on the unit.
2. Press the FUNCTION button to select "CD Mode".
3. Close the CD door and the disc will rotate for a few seconds and then play the 1st track automatically.
4. Press the and
5. To temporarily stop playback, press the
6. Press the button to stop play.
Note: Because MP3 discs have a large capacity, disc access times are a little longer.
REPEAT PLAYING FUNCTION
Single track repeat
Press the REPEAT button once to repeat a single track. The words "Repeat one" appear on the display.
Repeating All Tracks on a Disc
In Play mode, press the REPEAT button twice to repeatedly play all tracks on the disc. The display will
show "Repeat All".
To cancel repeat play, press the REPEAT button repeatedly until the "Repeat off" sign appears.
buttons are used to jump to a different track number or to scan disc tracks at
button. The current track will be scanned and move backwards to the
button, and the current track will be scanned and move forward to the next
buttons to allocate the desired track.
buttons to choose a track.
button; to resume, press the button again.
- EN 11 -
button.
button to hear the next