Hama EWS-165 Mode D'emploi page 10

Transmission collision
Signals from other household devices, such as door bells,
home security systems and entry controls, may interfere
with those of this product and cause temporarily reception
failure. This is normal and does not affect the general per-
formance of the product. The transmission and reception
of temperature readings will resume once the interference
recedes. Different channel may be reduce the interference.
How to set the radio controlled clock
• After the batteries are installed. The clock will
automatically search the radio signal. It takes about
3-5 minutes to fi nish this process.
• If the radio signal is received, the date & time will be set
automatically with radio control signal icon
• If the clock fails to receive the time signal, it will be with
the icon turns off. Then user can set the time
manually.
• Radio-controlled signal will be scheduled to receive
every hour.
Calendar clock display modes
The clock and the calendar share the same section of the
display. The calendar is displayed in a day-month format.
Each press on the MODE button will change the display
between clock with second, clock with day of week, zone
time with second and day-month.
How to set the clock manually
To set the clock manually, hold MODE for two seconds it
will show the year. Use
Press MODE to confi rm. Repeat the same procedure to set
the month, date, date-month format, 12/24, hour, minute,
display language, zone time offset and °C/°F.
During the setting. Press and hold
or decrease the value rapidly.
For display language, you can choose among English (EN),
German (DE), French (FR), Italian (IT) and Spanish (SP),
Dutch (DU) and Swedish (SW)- in that order.
If there is an item you do not wish to change, simply press
MODE to bypass the item.
When you fi nished the change, press MODE to exit. The
display will return to the clock mode.
How to set and arm the Alarm
To set an alarm.
1. Press ALARM once to display alarm time. If the alarm is
disarmed, the time will be displayed as "OFF".
2. Hold ALARM for two seconds. The hour digits will blink.
3. Enter the hour using
4. Press ALARM. The minute digits will blink.
5. Enter the minutes using
6. Press ALARM to exit.
092659man_bg_de_el_en_fr_nl_pl.indd 9 092659man_bg_de_el_en_fr_nl_pl.indd 9
turns off.
or to change it.
or will increase
or .
or .
7. Repeat the same procedure to set single alarm.
The alarm " " " " and "PR-AL" icons will be
displayed indicating which alarm is armed. You can also
arm or disarm an alarm by pressing the UP, DOWN button
at alarm display mode. Press MODE to return to clock
display mode.
Snooze feature
When the alarm sound is on, press the snooze key enter
snooze mode. After 8 minutes, it alarm sound will be wake
up automatically. The snooze cycle will be restart if you
press the snooze key again.
If you leave the alarm sound on for 2 minutes, it will enter
snooze mode automatically with maximum 3 times.
How to stop an alarm
Press ALARM on the unit to stop an alarm.
Precautions
This product is engineered to give you years of satisf-
actory service if you handle it carefully. Here are a few
precautions:
1. Do not immerse the unit in water.
2. Do not clean the unit with abrasive or corrosive
materials. They may scratch the plastic parts and
corrode the electronic circuit.
3. Do not subject the unit to excessive force, shock, dust,
temperature or humidity, which may result in
malfunction, shorter electronic life span, damaged
battery and distorted parts.
4. Do not tamper with the unit´s internal components.
Doing so will invalidate the warranty on the unit and
may cause unnecessary damage. The unit contains no
user –serviceable parts.
5. Only use fresh batteries as specifi ed in the user`s
manuel. Do not mix new and old batteries as the old
ones may leak.
6. Always read the user`s manual thoroughly before
operating the unit.
Alarm feature
• Weekday Alarm
This function allows you to restrict the alarm to weekday
(Monday to Friday). The alarm is activated and the
weekday symbol lights up if the weekday alarm function
was set and the alarm time is reached. There is no alarm
on Saturdays and Sundays for this alarm function.
• Single Alarm
The alarm sound will be activated and the icon will be
fl ashed once when it is armed and the alarm time is
reach. Once it fi nished, it will be disabled automatically.
9
22.07.10 09:1 22.07.10 09:1