Placing The Specimen; B-20R / M-100Fx / M-100Fled; B-20Cr; Use With Batteries - Optika Italy ECOVISION Serie Mode D'emploi

8.3

Placing the specimen

8.3.1 B-20R / M-100FX / M-100FLed

1. Place the specimen on the stage and secure it
using the stage clips ①. (Fig. 7).

8.3.2 B-20CR

Stage accepts standard slides 26 x 76 mm, thickness
1,2 mm with coverslide 0,17 mm. (Fig. 8)
1. Open the spring arm of the slide holder ② and
place the slide from the front on the stage.
2. Gently release the spring arm of the slide holder.
• A sudden release of the spring arm could
cause the falling of the slide.
8.4

Use with batteries

8.4.1 M-100FLed

• The microscope is provided with an ON-OFF
switch ③ (Fig. 9) placed on the bottom side of the
microscope. The use of the switch is as follows:
1. Switch placed in "OFF" position: use of the
microscope is possible only with external power
supply. Battery use and recharge is disabled.
2. Switch placed in "ON" position: use of the mi-
croscope is possible either with external power
supply or with batteries. In this case the battery
recharge is enabled.
②
Page 10
①
F ig. 7 F ig. 7
F ig. 8 F ig. 8
③
F ig. 9 F ig. 9
F ig. 10 F ig. 10