Grundig M 2000 BT Mode D'emploi page 29

TUNER­MODE
Selecting­the­tuner­input­source
1­Select the TUNER input source by pressing »
«­ on the device or »FM« on the remote
control.
– The most recently selected station is played
(Last Station Memory).
Selecting­presets
1 Select a preset by pressing »
the remote control.
Note:
You can also select the preset with the number
7
buttons »1­...­0«.
For two-digit preset numbers, first press
»10+«. The "10s place" then stays selected.
Stereo/mono­reception
When the hi-fi system receives stereo channels,
» « appears in the display. If the signal from
!
the stereo channel is weak, you can improve the
sound quality by switching to mono reception.
1
Press » « on the remote control to switch to
b
mono reception.
2 To switch back to FM stereo, press »
the remote control.
Displaying­ RDS­ station­ informa-
tion
If the device receives an RDS station, the station
name appears in the display together with »RDS«. If
no information is available, the reception frequency
appears in the display.
Additional information can be displayed.
1
To display information on the current RDS sta-
tion, press »INFO« repeatedly.
– The following displays appear in sequence:
The name of the radio station.
The current programme type (PTY), e.g.
»Pop music«. »[No PTY]« appears if infor-
mation is not available.
The time.
The radio text.
The frequency.
­ - -----------------------------------------------------------------------------------------------------------------------
« or » « on
« on
b
29­
ENGLISH