Yakima RailGrab 2 Mode D'emploi page 2

Install first Determine Install second set
Overview Claw Set Up
set of towers crossbar spread of towers
YOU
ARE
HERE
Familiarize yourself with these concepts and terms,
READ THROUGH THIS ENTIRE INSTRUCTION
and installation will be a snap. Throughout this
BEFORE BEGINNING INSTALLATION!
document a time line will show you where you're at
This product is the base for everything you'll do
in the process. Notice the time line at the top of the
with your rack, we want to help you get this right.
next page and throughout these instructions.
There are two basic types of factory rails, Raised Rails, and Flush Rails.
raised rails flush rails
FACTORY RAILS
Raised rails are raised up off of the vehicle's roof. Flush rails are flush with the vehicle's roof.
= cross-section view
Factory rails come in many different shapes. Some rails
have a notch in them. Other rails have a slot in them.
cross-section cross-section cross-section cross-section cross-section
with a notch with a notch
with a slot
1033604D-2/27