Hoover POWERDASH FH13010PC Mode D'emploi page 12

Maintenance
Cleaning Brushroll & Belt Maintenance
HOW TO REMOVE
1
Turn unit off and unplug
from electrical outlet.
Flip cleaner on its side to
expose bottom of cleaner.
2
To remove belt covers,
use Philips screwdriver to
remove 6 screws. Arrows
show location of screws.
*in front of wheel
BRUSHROLL & COVER CLEANER
1
Use comb side of tool to
comb through the bristles
to remove debris & hair.
12
3
Remove belt covers
from unit.
2
Use hook side of tool to
get inside nozzle area to
remove any excess debris
or hair.
BELT PART #: 440014074 – TO BUY, VISIT HOOVER.COM
4
Pull brushroll toward
user to remove from
unit.
5
Remove Belt and
Dispose if replacing.
Rinse brushroll and
allow to dry.
*Tool may not be included in all models. Visit Hoover.com to purchase.