Hoover POWERDASH FH13010PC Mode D'emploi page 11

Maintenance
How to Clean Nozzle
1
To prevent possible leaking,
remove tanks from the unit.
2
Unit should be in upright
position.
3
Grip the top of the nozzle and
pull up to remove. Lift the unit
up slightly to remove nozzle.
4
Rinse the nozzle under running
water to remove any dirt or
debris. Allow it to dry.
5
Replace the nozzle by aligning
the tabs at the bottom of the
nozzle to the foot.
6
Snap nozzle into place.
11