Table des Matières
Publicité
Les langues disponibles
Les langues disponibles
INSTALLATION DIMENSIONS
In the drawing below, all the dimensions are displayed in mm.
min. 560+8
min.
550
Compact appliances H: 454 mm
ELECTRICAL CONNECTION
Check that the voltage in your home corresponds with the voltage printed on the appliance.
These groups in the meter must be secured with at least 16 amps each. The connection cable must have a length of at least 1.0 m.
When the cable is too short, you have no room to already connect the oven and place it against the wall before plugging it in.
THE FITTING OF THE APPLIANCE
• Check that the cabinet and the space for the oven meet the dimension and ventilation requirements.
• Slide the warming drawer into the cabinet. Make sure the housing of the warming drawer does not come in contact with the walls of
the kitchen cabinet. Make sure there is at least 2 mm between the appliance casing and the walls of the kitchen cabinet. Make sure
the warming drawer is centered between the walls of the kitchen cabinet. Note: Make sure the cable is not stuck and does not lie on
top of the warming drawer.
• Open the drawer.
• Use screws to fasten the warming drawer to the cabinet. Take care not to over tighten and break the spacer.
• Close the drawer and plug the appliance in.
• The warming drawer is now ready for use.
30
•
English
min. 560+8
min.
550
Big oven H: 595 mm
45
Publicité
Table des Matières
