Publicité
Les langues disponibles
Les langues disponibles
SAVE THESE INSTRUCTIONS
This appliance is for: 110-240V AC, 50/60HZ, 64W
BASIC OPERATIONS
1. Ensure that the attachment is properly locked into the tool base.
2. Plug appliance into the correct power source.
3. Place thermal glove on the hand prior to turning the tool on.
4. Press the power button once to turn on the iron.
5. To select from the preset temperature settings use the (
Fine : 170°C
Medium : 180°C - 190°C
Coarse : 200°C - 215°C
6. The selected temperature will illuminate and blink until the iron has reached
the desired setting.
7. After 1 hour of stand-by, the tool will shut off.
8. To turn off the tool, press the power button once.
9. Unplug the tool directly from the wall; do not pull on the cord.
ATTACHMENT PLACEMENT & REMOVAL
1. Ensure that the iron is unplugged and not heated before adding or
switching attachments.
2. Using the thermal glove provided, attach the desired styling attachment to
the tool base by lining up the
position.To lock attachment in to place: Press down the attachment at the
cool tip end and twist the handle ring to the left to match up the
to the
arrow on the LOCK position.
TO UNLOCK THE ATTACHMENT: Allow the attachment to cool and turn the
tool off before removing as it may still be heated. Twist the handle ring to the
right to match up the
4
OPERATION INSTRUCTIONS
arrow to the
arrow to the
arrow on the UNLOCK
arrow on the UNLOCK position.
) or (
) buttons.
arrow
Publicité
