Assembling The Device; Initial Startup - Kärcher WV 6 Plus D500 Mode D'emploi

Charging socket
1
Handle
2
Trigger ("ON" / "OFF")
3
LED display
4
Separator
5
Suction nozzle
6
Clamping rail
7
Squeegee blade
8
Spray bottle
9
Place the wiping attachment
10
Adapter
11
Microfiber wipe cover
12
Spray lever
13
Spray head
14
Detergent
15
Charger
16
Connection plug
17
Waste water tank cap (only visible
18
when the waste water tank is re-
moved)
Waste water tank
19
Type plate (only visible when the
20
waste water tank is removed)

Assembling the device

1. Insert the suction nozzle into the
separator until the suction nozzle
audibly latches into place.
Assembling the device
1. Insert the suction nozzle into the
separator until the suction nozzle
audibly latches into place.
Use the narrow suction nozzle for
small narrow surfaces.
8

Initial startup

Battery charging
Note
The device is supplied with a dis-
charged battery. Fully charge the bat-
tery before using the device for the first
time.
1. Plug the charger into a mains sock-
et.
2. Plug the connecting plug into the
charging socket on the device.
3. The charging process is indicated
for approx. 25 min by the status bar
running upwards.
English
1.
2.
~25 min