CLAS PE 6004 Mode D'emploi page 33

PE 6004 PE 6001
DOUBLE SCISSOR LIFT DUAL CYLINDER 3.5T DOUBLE SCISSOR LIFT 3T
Installation scheme for scissor lift:
Concrete type 425#.
Thickness of concrete≥150mm, the leveling of whole length ≤5mm.
Notes: When the underlay thickness is less than 150mm, the fi nal part of the P1 and P2 platforms
should be expanded to: 2500 × 2500mm and the concrete thickness ≥150mm. The minimum
concrete thickness and leveling are the key features that must be met to ensure the correct
alignment of the deck.
PAY ATTENTION TO VEHICLE PARTS:
THE LOWER PARTS OF THE VEHICLES, LIKE SPORTIVE CAR UNDERBODY, COULD INTERFERE
WITH SOME STRUCTURAL PARTS OF THE LIFT.
The lift will also handle customized or non-standard vehicles assuming they are within the
maximum specifi ed carrying capacity.
Also the personnel safety zone must be redefi ned in relation to vehicle with unusual dimensions
Picture 4 (in fl oor installation)
33