CLAS PE 6004 Mode D'emploi page 29

PE 6004 PE 6001
DOUBLE SCISSOR LIFT DUAL CYLINDER 3.5T DOUBLE SCISSOR LIFT 3T
MANUAL INTRODUCTIONS
This manual has been prepared for those who are expert in the use of the lifters such
as operators and technicians that are responsible for the installation and the routine
maintenance.
Workers should read carefully the 'Maintenance & User Manual' before carrying out any
operation on the lift.
This manual contains important information regarding:
CONSERVING THE MANUAL
This manual is an integral part of the lift.
The manual must be kept in the vicinity of the lift, so that the operator and maintenance
staff can easily locate and consult the manual at any time.
We particularly recommended reading Chapter 3 which contains important information
and safety warnings.
The lift is designed and manufactured according to the European Standard
Lifting, transport, unpacking, assembly, installation, starting up, initial adjustment and
testing, extraordinary maintenance, repair, overhauls, transport and dismantling of the lift
are all operations that must be performed only by specialized personnel or by licensed
dealer authorized by the manufacturer.
The manufacturer declines all responsibility for injury to persons and damages to vehicles
and objects when any of the above mentioned operations has been performed by
unauthorized personnel or when the lift has been subject to improper use.
This manual indicates: the operative and safety aspects that may be useful to the operator
and maintenance workers. For a better understanding of the structure and its functioning,
workers must carefully read the 'Maintenance & Use Manual'.
To ensure a better use of the equipment, it is necessary to understand the terminology
used in this manual, to know the maintenance and repair activities, to be able to correctly
interpret the technical drawings and descriptions contained in the manual, and be aware
of the regulations in force in the country where the machine is installed.
The same requirements are also asked for the maintainer and installer, who must also
possess specific and specialized knowledge in both mechanical and engineering fields.
OPERATOR: person authorized to use the lift
MAINTENANCE FITTER: person authorized for routine maintenance on the lift.
Manufacturer reserves the right to make changes to this user manual if
technological improvements occur.
29