Kamikaze KV 4 Manuel D'utilisateur page 104

ELECTRONIC CORDLESS TYING MACHINE
• Don't use the equipment during rainy days.
• After daily usage, it is suggested to disconnect the battery to the machine
and place them together in the toolbox.
• According to the size of actual branches to be tied, adjust gear switch
with the buttons place on the tying machine, so as to achieve the best
branch-tying effect.
In case tying operation speed becomes slow, please check if battery
charge is used up.
The repair work and functions unmentioned in the instructions shall
be implemented by the Service Centre. To ensure safe usage, only
original parts can be used.
It is necessary to stop working when the residual thread has a
length of about 20 cm.
Remove the remaining thread and insert the new thread as shown below.
If the residual thread is not removed, there is a risk of locking and jamming
Open the front cover and remove the pressing plate.
104
www.kamikazevolpi.com