Reverse Function - Rexel ProStyle+ Manuel D'utilisation

Operation
After unpacking the product, pull out the shredder bin and
1
remove the CD shard tray and store externally. Reposition
the CD shard tray when you shred CD's to separate waste
for recycling.
Connect shredder to mains supply.
2
Ensure the on/off button on the back of the machine is in
3
the on position (a).
To commence shredding, press the central Auto button (e).
4
This sets the shredder into auto mode. The standby symbol
will illuminate blue.
Insert paper (or credit card) to be shredded into the feed
5
area (c).
6

Reverse Function

Should you wish to reverse the shredding direction whilst
1
shredding a document, a reverse button (f) has been fitted
for your convenience.
By pressing the reverse button the shredding cutters will
2
change direction allowing the retrieval of the document
being shredded.
The reverse function will only run whilst the button is being
3
pressed. When the reverse button has been released the
shredder will revert to Auto mode.
CD and Credit Card Shredding
Insert CD to be shredded into the feed area (d).
1
A separate CD tray is provided to collect the shredded CD
2
shards. Ensure that this is correctly mounted onto the bin
before shredding CDs or credit cards. CD and credit card
shards should be disposed of separately to paper.
Empty the CD tray after 8 credit cards or CD's to avoid
3
waste spilling over into the paper waste bin. Remove the CD
tray before recommencing to shred paper.
Bin Full
Empty or compress the shredded paper when it reaches the
bottom of the viewing window. This will avoid paper spilling
over or difficulty in removing the bin when it is too full. Over
filling the bin may cause the bin to jam.
Once the bin is empty, replace correctly or the shredder will not
function.
Lubrication of the Shredder
Only use Rexel Oil Sheets (2101948 & 2101949) to lubricate.
ACCO Brands accepts no liability for product performance or
safety when other types or brands of lubricants are used on any
part(s) of this machine.