Samsung RZ11T7474 Serie Mode D'emploi page 18

Installation
STEP 4 Adjust the levelling legs
CAUTION
• The refrigerator must be levelled on a flat, solid floor. Failing to do so can cause damage
to the refrigerator or physical injury.
• Levelling must be performed with an empty refrigerator. Make sure no food items
remain inside the refrigerator.
• For safety reasons, adjust the front side a little higher than the rear side.
The refrigerator can be levelled using the front legs that have a special screw (leveller) for
levelling purposes. Use a flat-head screwdriver for levelling.
18 English
Untitled-6 18
To adjust the height of the left side:
Insert a flat-head screwdriver into the
leveller of the front left leg. Turn the
leveller clockwise to raise, or turn it
counter clockwise to lower.
To adjust the height of the right side:
Insert a flat-head screwdriver into the
leveller of the front right leg. Turn the
leveller clockwise to raise, or turn it
counter clockwise to lower.
2020-12-29 3:31:34