Using The System - Luvion PLATINUM 2 Guide D'utilisation

Power adapter
Connect the DC 5V power adapter to the DC 5V input at the back of the baby unit.
Plug the power adapter in the wall socket.
Batteries
Remove the battery pack cover off the base of the baby unit. Place 4AA batteries into the
battery pack. Make sure to correctly line up the positive and negative poles of the batteries.
Place the battery pack cover back on.
Note: We advise you always to use the main power for the baby unit. Should there be no main
power around, we advise you to use non-rechargable batteries.
Note: Should you decide to use batteries, make sure that the power adapter is not connected to
the camera!

USING THE SYSTEM

The video of the baby unit will be displayed
on the screen of the parent unit when both
are switched on.
1. Signal indicator
The signal indicator
shows the strength of the signal being
recieved from the baby unit. One or no bars
indicate a poor signal and 4 bars indicate a
strong signal.
2. Channel indicator The channel indicator
displays the current channel. Press the
button to switch between the available baby
units. To automatically switch between the
channels press the button.
3. Temperature indicator Displays the
temperature measured by the baby unit.
4. Nightlight indicator
indicator is displayed when the nightlight on
the baby unit is turned on.
5. Overwrite OW indicator When you have
selected "yes" for the overwrite function. The
letters OW will be displayed on the screen.
LUVION
All manuals and user guides at all-guides.com Premium Babyproducts
Signal strength
Perfect
Good
Fair
Low
No Signal
The nightlight
1 2 3
Cam1 25°C
8
9
10
BRAHMS
Indicator Warning
None
None
None
Out Of Range
Out Of Range
9
4 5 6 7
OW