Overview Baby Unit - Luvion PLATINUM 2 Guide D'utilisation

17. Nightlight button Press this button on the parent unit to remotely turn on/off the
nightlight on the baby unit. When the nightlight is turned on the nightlight icon
appear on screen.
18. Micro SD card slot Place a Micro SD card in this slot for video and audio recording. When an
SD card is placed in the parent unit the SD card icon will appear on screen.
OVERVIEW OF BABY UNIT
Temperature sensor Measures the temperature.
1.
2. Pair button The pair button is located at the back of the baby unit. It enables you to
reconnect the baby and parent unit or to add additional baby units. See chapter on baby
unit pairing for further information.
Camera antenna Sends and receives signals to/from the parent unit.
3.
4. Lens / Infrared light These LEDs are automatically activated when the room gets darker
and enable you to monitor the baby under no/low light conditions. The infrared LEDs do
use a lot of energy and can therefore empty the batteries more quickly.
ON/OFF button Turns the baby unit ON or OFF.
5.
Microphone Receives sounds from the area near the baby unit and transmits it to the
6.
parent unit.
Night light Press this button to turn on the night light. The night light can also be turned
7.
on/off remotely with the parent unit's night light button.
Sensitivity To adjust the sensitivity of the camera. A lower sensitivity means that sounds
8.
received by the baby unit need to be louder to be transmitted to the parent unit. A higher
sensitivity means that at a low sound level the sounds will be transmitted to the parent unit.
Note: If you wish to monitor every sound. Go to Menu Automute and select NO. This will activate
an "open channel".
ECO switch Allows you to set a lower transmitting power. This will save energy.
9.
10. Volume To increase or decrease the volume of the lullabies.
11. DC 5V power adapter Enables you to connect the baby unit to the electricity grid.
Note: The baby unit can also be powered by 4 AA batteries (not included). The batteries are
intended for short term, portable camera use. Do not leave the batteries in the baby unit when
you use it with the power adapter.
12. Battery compartment Open this compartment to place 4AA batteries to power the baby
unit.
LUVION
All manuals and user guides at all-guides.com Premium Babyproducts
7
will