Fm Menu; Station List; Automatic Scan For Fm Stations; Scan Treshold - Albrecht Audio DR 53 Mode D'emploi

Table des Matières

Les langues disponibles

7.5. FM Menu

Press the MENU button on the remote controll and select a sub-menu.

Scroll through the station list with ▲/▼ and select a frequency with OK.

Automatically scan through the complete FM band to find all available stations. The stations will be

saved in your station list.

There are two different options to choose from:

Strong stations - The scan will only stop when a strong signal strength is received which should

also result in a better audio quality. It is possible that the station you are scanning for may be

missed using this option.

All stations - The scan will stop for every station it receives, even if the signal strength is poor.

The radio will automatically switch between Stereo and Mono, depending on the quality of the signal

being received but you can override this function and manually switch between Forced Mono and

Stereo Allowed.

To switch to Bluetooth mode, press MODE on the remote control or on the top side of the adapter

and select Bluetooth.

Then enable Bluetooth on your mobile device (e.g. smartphone, tablet, etc.), search for active

devices and connect to "Albrecht DR 53".

If the radio is successfully connected, music can now be streamed to the adapter. Thanks to the

newest Bluetooth chip ISSC supporting ID3 installed inside the unit, the song information from your

mobile device will be displayed on the screen of the adapter.

If the adapter is paired with a mobile device and you would like to connect the DR53 to a different

phone, just press the BT PAIR button on the remote. The current Bluetooth connection is

disconnected and you can now pair another mobile device with the adapter.

Table des Matières

Table des Matières