Publicité
Les langues disponibles
Les langues disponibles
Align the fastening knob (11) with the locking notch on the supporting tube (9). Tighten the fastening knob
to fix the fan head. Slightly twist the supporting tube left and right to ensure the fan head has been locked.
OPERATING INSTRUCTIONS
1.
Plug the power cord into a suitable socket.
2.
Switch on the fan by using the speed switch on the motor housing. "0" = off, "1" = low speed, "2" = medium
speed, "3" = high speed.
3.
Tilting angles: You can loosen the screw on the side of the supporting tube to adjust the fan to your
preferred elevation. Then fasten the elevation by tightening the screw.
4.
Oscillation: to make the fan head oscillate, push down the oscillation knob on the top of the motor. To stop
the fan head from oscillating, pull up the oscillation knob.
CLEANING
1.
Before servicing the fan and after each occasion of use, switch off the appliance and unplug the mains
cable from the socket.
2.
Never immerse the appliance in water (danger of short-circuit). To clean the appliance, only wipe it down
with a damp cloth and dry it carefully. Always take out the mains plug first.
3.
Take care that excessive dust does not build up in the air-intake and air-outlet grille, and clean it
occasionally using a dry brush or vacuum cleaner.
TECHNICAL DATA
Operating voltage: 220-240V ~ 50Hz
Power consumption:
Eco design requirements
Product information requirements
Maximum fan flow rate (F)
Fan power input (P)
Service value (SV)
Measurement standard for service value
Standby power consumption (PSB)
Fan sound power level (LWA)
Maximum air velocity (c)
Contact details for obtaining more information
GUARANTEE AND CUSTOMER SERVICE
Before delivery our devices are subjected to rigorous quality control. If, despite all care, damage has occurred
during production or transportation, please return the device to your dealer. In addition to statutory legal rights,
the purchaser has an option to claim under the terms of the following guarantee:
For the purchased device we provide 2 years guarantee, commencing from the day of sale. If you have a
defective product, you can directly go back to the point of purchase.
Defects which arise due to improper handling of the device and malfunctions due to interventions and repairs
by third parties or the fitting of non-original parts are not covered by this guarantee. Always keep your receipt,
without the receipt you can't claim any form of warranty. Damage caused by not following the instruction
manual, will lead to a void of warranty, if this results in consequential damages then we will not be liable.
Neither can we hold responsible for material damage or personal injury caused by improper use if the
instruction manual is not properly executed. Damage to accessories does not mean free replacement of the
- 5 -
50W
46.85 m³ /min
36.66 W
1.28(m³ /min)/W
IEC 60879: 1986 (corr.1992)
0.00 W
62.8 dB(A)
2.78 meters/sec
Coplax AG
Chamerstrasse 174
CH-6300 Zug
FN-108740.4
Publicité
