Installation In The Vehicle - KIDDY isofix Notice De L'utilisateur

The Isofix platform is a safety product that ensures the safety of the
user only if it is used according to the regulations.
Before each trip, check whether the ISOFIX connectors are
connected to the vehicle and the support leg/base is adjusted
accordingly. Also make sure that the child seat is properly latched
onto the Isofix platform.

4. Installation in the vehicle

The support base must be folded out before installation in the vehicle.
Check now whether the ISOFIX hooks are opened (see point 5 Removal).
Now slide the connectors onto the ISOFIX anchor fittings and push firmly
against them (Fig. 1).
The correct engagement/latching will be confirmed by the ISOFIX
indicator on the left and right connector (Fig 1). Check by pulling on
the platform that both connectors are securely locked.
As the final step of the installation, the support base can be adjusted. Swing
the support base fixing cover backwards (Fig. 2; number 1) and slide the
support base out until it rests on the vehicle floor and the support base
indicator shows 'green' (Fig. 2; number 2). Now lift the platform a little, until
the support base fixing cover snaps forward again and the 'red' support leg
indicator is no longer visible from the fixing cover (Fig. 3).
4
ENG