Lincar Monella Instructions D'utilisation Et D'entretien page 65

Activate(on) / Deactivate(off) to make operative or to exclude the programmings of the week
START 1 WEEK-END
M-2-4-02
STOP 1 WEEK-END
M-2-4-03
START 2 WEEK-END
M-2-4-04
STOP 2 WEEK-END
M-2-4-05
The program hours will be repeated every day of the week in the same way. For a correct
execution of the programs, set very carefully the data of Menu 01.
Selecting oFF instead of the starting or extinction hour, the appliance exclude the automatic
starting or extinction
Menu 03 SELECT LANGUAGE - (setting up the language of the control panel).
Display
SELECT
LANGUAGE
Available languages : ITALIAN, ENGLISH, DEUTSCH, FRANCAIS
Menu 04 STATUS STAND-BY - (Set up way of appliance extinction according to the room
and boiler temperatures).
Display
STATUS STAND-BY
ON, If the appliance is exceeding 2°C the set value of room or boiler temperature, it starts the
OFF, If the appliance is exceeding the set value of room or boiler temperature, it will continue to work
Menu 05 STATUS BUZZER - (Setting up of buzzer sound).
Display
STATUS BUZZER
Available selections: OFF, ONLY ALARMS, ALWAYS ON
OFF – Always off
ON ALWAYS, sound in case of alarm and at any tuch of the buttons of the control panel.
Menu 06 LOAD INITIAL - (Continuos fuel load setting).
Display
LOAD INITIAL
this operation can only be effected when the appliance on the display is evidencing "OFF". This menu is
utilized to fill the screw feeder when the appliance is new or in case of emptying of the pellet container.
Menu 07 STATUS STOVE - (Displays the status of the appliance).
Display
STATUS STOVE
Fume temperature, fume expeller motor rev/min, appliance status, room temperature, boiler pressure,
time of fuel loading, and a screening of informations for TECHNICIANS.
Menu 08 PELLET CORRECT - (Correction of appliance combustion).
Display
PELLET CORRECT
ACCESS KEY
PELLET CORRCT
Insert 1 starting hour
Insert 1 extinction hour
Insert 2 starting hour
Insert 2 extinction hour
Description
Set up the language of the control panel
Activate(on) / Deactivate(off) the stop modality if the set room or
boiler temperatures have been exceeded .
Available selections : on, oFF
extinction cycle.
at min. power, without extinctinguishing.
Description
Select the buzzer modality you wish
ONLY ALARMS – Sounds only if an alarm has occurred.
Activates the continuos load of fuel
Shows informations about the working of the appliance
Displayed values:
Combustion modification
Insert access key to accede to the combustion modification
Correction of the load of fuel
65/112
IT-GB-FR mod. 940-940/SA
Description
Description
Description
Description
07:00 00:00-off
12:00 00:00-off
14:00 00:00-off
off 00:00-off
Example
ENGLISH
Example
oFF
Example
ONLY ALARM
Example
Example
Example
33
-02