IME Nemo D4-Le Mode D'emploi page 32

Nemo D4-Le
1.2 Connection
↵
selects the connection
Confirms
Select the desired connection and scrupulously respect the linked wiring diagram.
The selectable wiring diagrams are:
Symbol Line Load
1N1E Single-phase -
3-1E 3-phase 3 wires Balanced
3N1E 3-phase 4 wires Balanced
3-2E 3-phase 3 wires Unbalanced
3-3E 3-phase 3 wires Unbalanced
3N3E 3-phase 4 wires Unbalanced
1.3 Current delay time and average power
Selectable delay time: 5, 8, 10, 15, 20, 30, 60 minutes
The selected time is valid both for the current and the average power
↵
selects the time value
confirms
8
n°CT external Wiring Connection
1 S 1000/410
1 S 1000/411
1 S 1000/412
2 S 1000/413 Aron L1 - L3
S 1000/414
3
Current transformer connecion
S 1000/416
with common point, 1 return
S 1000/415
3
Current transformer connecion
S 1000/417
with common point, 1 return
1.4 Display lighting
The 4 selectable levels (0 – 35 – 70 – 100%) %) show the display lighting percentage
↵
selects the lighting level
confirms
1.5 Run hour meter count start
Select the quantity which starts the run hour meter count:
1.5a Voltage count start
Voltage: count start with phase voltage > 20V
↵
selects voltage or power
confirms
1.5b Power count start
↵
selects voltage or power
confirms
Power: total active power, programmable value 0,1...50%Pn
moves the cursor
↵
increases/decreases the loaded value
confirms
Voltage or Power.
(rated power)
07/18 E07 10782956 WEB E cod.MFD44..