Transport; Storage; Care And Maintenance; Troubleshooting - Kärcher IVR-L 100/18-2 Tc Dp Mode D'emploi

Transport

CAUTION
Risk of injury and damage! Observe the
weight of the appliance when you transport
it.
 When transporting in vehicles, secure
the appliance according to the guide-
lines from slipping and tipping over.

Storage

CAUTION
Risk of injury and damage! Note the weight
of the appliance in case of storage.
This appliance must only be stored in inte-
rior rooms.

Care and maintenance

 Rinse the appliance and the accesso-
ries with fresh water at regular intervals
and let them dry.
 In order to avoid bacterial contamina-
tion, do not leave fluids inside the de-
vice.
 During extended operation breaks,
open the cover to let the residual mois-
ture escape.
Replacing the filter
 Unscrew the screw plug.
 Remove and replace filter.
 Insert new filter.
 Screw in the locking screw and tighten
it again.
Note: During installation, it must me en-
sured that the filter is inserted correctly.

Troubleshooting

DANGER
First pull out the plug from the mains before
carrying out any tasks on the machine.
DANGER
Have all checks and works on electrical
parts performed by an expert.
Motor (suction turbine) does not
– No electrical voltage.
 Check the receptacle and the fuse of
the power supply.
 Check the power cable and the power
plug of the device.
Drum pump is not delivering
– Fluid container empty.
 Only use the drum pump when the fluid
container is filled.
– No electrical voltage.
 Check the receptacle and the fuse of
the power supply.
 Check the power cable and the power
plug of the device.
– Delivery rate set incorrectly.
 Adjust the delivery rate by means of the
+/- button.
– Retaining plate clogged.
 Clean retaining plate.
Suction capacity decreases slowly
– Nozzle, suction hose or suction pipe
may be blocked.
 Check, clean accessories.
– Filter is dirty.
 Clean filter.
Manual emptying of the fluid
container takes a long time
– Drain hose crushed or obstructed.
 Check / clean drain hose.
– Retaining plate clogged.
 Clean retaining plate.
Customer Service
If malfunction can not be fixed, the de-
vice must be checked by customer ser-
vice.
– 6
EN
start
11