tiko Energy Solutions M-Box Manuel De L'utilisateur page 4

M-Box NG User's Manual
Features
M-Box features:
• Communication gateway between devices of tiko installation and back-end pri-
vate cloud system:
o
o
• status LEDs showing data connection and device errors.
Package Content
Open the package and check that you have all the following items:
• Instruction manual
•
M-Box (IMAGE 1)
•
Optional: LAN cable (IMAGE 3) in Kit K01-GM-01.0005R06-CA-ETHC
If any of the parts are incorrect, missing, or damaged, please contact the retailer where
you made your purchase. Keep the carton box, including the original packing materials, in
case you need to return the unit for repair.
Device
IMAGE 1 shows the device from the front side. IMAGE 2 shows available variants of the
plug: Type 11, with Type F (Schuko) adapter and Type I (Australia/New Zealand).
On the rear side of the device a label is indicating
•
The manufacturer
•
The device model number (REF) and the current rating
• The hardware (HW) and firmware (FW) version
•
The unique serial/MAC address as text and as Aztec 2D code (SN/MAC)
Installing the M-Box
Step 1 Plug the M-Box into a free socket. Please see also section PLC Quality.
Step 2 Optional (if connection to back-end via ethernet): Connect the LAN ca-
ble to your router (IMAGE 5).
Step 3 To finalize the installation, all tiko devices must be configured using the
installation app.
tiko Energy Solutions AG
To other devices: through power lines (PLC) or 868 MHz radio antenna
To back-end: private mobile connection (GSM) or internet over ether-
net network
English
Installation
4 / 40
IM-0004-0001 Rev. 6