tiko Energy Solutions M-Box Manuel De L'utilisateur page 2

M-Box NG User's Manual
Safety Warnings and Working Instructions
Hazard Risk
Read the user manual before installing and operating this product!
Installation by person with electronical expertise and trained on this product
only!
Only use for current/voltage as indicated on the device label! Doing other-
wise can cause device damage and may pose an electrical shock or fire haz-
ard!
Warnings
•
Read the installation instructions before you connect the system to its power
source.
• To prevent the system from overheating, do not operate it in an area that ex-
ceeds the maximum admitted ambient temperature of 40 °C.
• This product relies on the building's installation for short-circuit (over current)
protection. Ensure that a fuse or circuit breaker no larger than 230 VAC, 10 A is
used on all current-carrying conductors.
•
Do not work on the system or connect or disconnect cables during periods of
lightning activity.
• Device is intended for indoor use only.
• Ultimate disposal of this product should be handled according to all national
laws and regulations.
•
Any usage of this device in a manner that does not conform to this manual spec-
ification can impair the provided safety protection.
Safety Instructions
Read these safety instructions carefully.
• Follow common household electrical safety practices.
•
Disconnect this equipment from the socket before cleaning it. Do not use liquid
or sprayed detergent for cleaning. Use moisture sheet or cloth for cleaning.
• The openings on the enclosure are for air convection and protect the equipment
from overheating. Do not cover the openings.
• Do not pour any liquid into opening. This could cause fire or electrical shock.
•
Do not open the enclosure of this product and/or alter this product in any way.
tiko Energy Solutions AG
English 2 / 40
IM-0004-0001 Rev. 6