tiko Energy Solutions M-Box Manuel De L'utilisateur page 3

M-Box NG User's Manual
•
The device must not be installed close to a radiator or other heat source, and
not exposed to direct sunlight.
•
Disarm main circuit-breaker (cut power), disconnect the device, re-arm circuit-
breaker, if one of the following situations arises:
o
o
o
o
o
• Keep this equipment away from excessive or condensing humidity.
• Do not leave this equipment in an unconditioned environment. Temperatures
above 40 °C will damage the equipment.
•
Keep this guide for later reference.
Feedback
You can submit comments via email to info@tiko.energy
You can also submit your comments via regular mail by writing to the following address:
tiko Energy Solutions AG
Alte Tiefenaustrasse 6
CH-4600 Bern
We appreciate your comments.
Intended Use
The M-Box is a highly secure router which connects the tiko installation to the tiko data-
center (back-end private cloud system).
Any installation or usage which does not conform to tiko Energy Solutions AG setup is
strictly forbidden. tiko Energy Solutions AG is not responsible for any improper installa-
tion/usage of this device.
tiko Energy Solutions AG
Liquid has entered the equipment.
The equipment has been exposed to moisture.
The equipment does not work properly, or you cannot get it to work
according to user's manual.
The equipment has been dropped or damaged.
The equipment has obvious signs of breakage.
English
Overview
3 / 40
IM-0004-0001 Rev. 6