Publicité
Les langues disponibles
Les langues disponibles
DM 1522
AUTOMATIC TIRE CHANGER 10"-24" 1 SPEED SYSTEM 220V
OPERATION
Never use the machine before read this instruction and warning carefully.
Demounting the tyres:
Release all the air inside the tyre.
Remove the weight on the rim (Fig.3)
Place the tyre between the bead breaker blade (22) and rubber pad,
and place the blade on the bead 2 cm from the rim, step on the pedal
(10) to separate the bead from the rim. (Fig. 4)
The wenthole on the tyre should not near to the bead breaker blade
during the operation.
Note: This machine is designed particularly for the low profile, stiff and
wide tyres, so there is a adjusting handle on the bead breaker.
When mount or demount the
particular wide tyres, the operator can adjust the handle position and
do the
operation on the wide tyres.(Fig. 5)
Faites tourner le pneu et renouvelez les opérations ci-dessus jusqu'à ce
qu'il soit entièrement sorti de la jante.
Sur le plateau, une règle de positionnement permet de positionner la
jante correctement (Fig. 6).
Turn round the tyre and repeat the above steps on the other parts of
the tyre to get it separate thoroughly from the rim.
The positioning scale on the turntable show the position of the rim
directly (Fig. 6). Place the tyre on the turntable after choosing the
locking method.
Normally when working for aluminum alloy rim, outside locking is
suitable, inside locking is seldom used.(Fig. 7 and Fig. 8)
Publicité
