Publicité
Les langues disponibles
Les langues disponibles
DM 1522
AUTOMATIC TIRE CHANGER 10"-24" 1 SPEED SYSTEM 220V
Thanks for choosing DM 1522 automatic tire changer. This guide is an important document for
the machine, for ensuring correct and safe operation, and also granting a long working life and
the best efficiency to the machine, please read this manual carefully before the installation and
operation.
Carefully keep this manual for use at any time.
INSTALLATION AND COMMISSIONING, PLEASE CONSULT US.
WITHIN THE FRAMEWORK OF THE GUARANTEE, INSTALLATION AND COMMISSIONING MUST
BE CARRIED OUT BY A PROFESSIONAL.
INTRODUCTION
Scope of Application
This DM 1522 machine is designed and made specially for changing the tires of cars, vans, light
trucks and motorcycle with the principle of best quality and highest working efficiency, especially
suitable for the stiff and low profile tyres.
Max wheel diameter: 1180mm
Max wheel width: 400mm
Note: This machine can only be used for the purpose designed by the manufacturer. Do not use it
for any other purpose.
Any damage caused by incorrect using or beyond the scope of application will not be covered
under warranty.
Note:
Unauthorized people should not stand close to the place with warning stickers and never take off
the stickers.
Never touch the moving parts during the operation.
The damage, due to the accident, misusing, unauthorized changing and repairing of the machine
caused by the operators or the third person, is not in charged by the manufacturer.
Transport
Make sure transport the machine with its original package, and place it according to the
marks on the package. The packed machine should be moved by means of a fork lift truck of
suitable capacity, insert the forks at the points shown in (Fig.1).
The temperature for the transportation should –250 to +550, some measure should be use to
prevent the humidity, shake and concussion.
Packing list
The tire changer
Help arm
Accessory box
Fig1
Publicité
