Table des Matières
Publicité
Les langues disponibles
Les langues disponibles
3.
Grip the levers, then gently slide the card straight out.
Warning:
When inserting and removing a card in bay 2, take care that the electromagnetic
interference (EMI) fingers located along the top edge of the front wall of the interface module
do not catch on the lower edge of the card above it in bay 1.
Inserting Interface Modules
To insert an interface module into a module bay:
Warning:
When inserting or removing interface modules, be sure that the power is off.
1.
Align the side edges of the card with the grooves in the side walls of the bay.
2.
Slide the card in until the card is forced to stop.
Warning:
electromagnetic interference (EMI) fingers located along the top edge of the front
wall of the interface module do not catch on the lower edge of the card above it in
bay 1.
3.
With your thumbs, push in the locking levers to secure the module.
NetScreen-ISG 2000
When inserting and removing a card in bay 2, take care that the
Removing and Inserting Interface Modules
39
Publicité
Chapitres
Table des Matières
