Unpacking The Beacon; Table 1 Electrical Ratings - Federal Signal Beacon 191XL Serie Manuel D'installation Et D'entretien

These devices are intended for permanent installation and
operation in accordance with Title 46, Code of Federal
Regulations, Parts 110–113, or Title 33, Code of Federal
Regulations, Part 183, Sub-part I, Section 183.410, and the
applicable requirements of the American Boat and Yacht Council,
Inc., and/or ANSI/NFPA 302, "Fire Protection Standard for
Pleasure and Commercial Motor Craft."

Unpacking the Beacon

EXPLOSION HAZARD: Damaged domes can lead to explosions
that could result in serious injury or death.
After unpacking the beacon, examine it for damage that may
have occurred in transit. If the beacon has been damaged, do not
attempt to install or operate it. File a claim immediately with
the carrier, stating the extent of the damage. Carefully check all
envelopes, shipping labels, and tags before removing or discarding
them. Disposal of all shipping materials must be carried out in
accordance with national and local codes and standards. If any
parts are missing, please call Federal Signal Customer Support at
800-524-3021 or 708-534-4790.
Operating Voltage:
Flashes/Minute:
Maximum Operating
Current:
Frequency:
DC In-Rush Current:
AC In-Rush Current:
Installation and Service Instructions

Table 1 Electrical ratings

24 Vdc/ac
60 FPM
380 mA
DC/50/60
1.75 A at 24 Vdc for 5 ms
2.0 A at 85 Vac and 1.5 A at 265 and
277 Vac for 0.25 ms
Model 191XL Series LED Beacon
100–265,
277 Vac
277 Vac
60 FPM 60 FPM
210 mA 130 mA
50/60 50/60
7