Quick Start And Troubleshooting - DK2 POWER OPC503V Guide De Montage

OPERATION
QUICK START & TROUBLESHOOTING
QUICK START SETUP
• Add 10W30 oil to engine
• Add gas
• Pin both wheels into pivot brake holes
• Turn key on
• Half throttle (choke optional for cold starts)
• Set throttle to just over turtle
• Pull start the engine
TREE CHIPPING
• Engine on highest speed
• Feed smaller trees into chute and let go, tree will auto feed.
• Feed larger trees slowly to allow cutter wheel to regain RPM speed between cuts
• Feed leaves, twigs and up to 3/8 diameter trees into top hopper
TROUBLE SHOOTING
ENGINE WON'T START
• Turn key on - check engine oil level - check gas level
• Follow your engine manual for further trouble shooting
UNIT VIBRATES
• Check your chipper for missing or loose blades
• Check your chipper wheel is not obstructed and freely turns
17