Step 4: Installing The Towbar And Stand Assembly - DK2 POWER OPC524 Guide De Montage

ASSEMBLY
STEP BY STEP INSTRUCTIONS

STEP 4: INSTALLING THE TOWBAR AND STAND ASSEMBLY

1. Grab the feed chute and tip the unit back, raising the front end up.
2. With the front end raised, install the tow bar hitch using bolts.
Assemble tow stand and insert the hitch pin.
3.
4. Lower the unit back to level and rest on the drop stand.
5. Insert the tow bar and secure with tow bar screw lock.
OPC524 man. v.210525 | 9