Display Brightness - Austro Flamm Ben Manuel D'instructions

english
Tap the screen (if it is still in idle mode) to leave idle mode. If the display is not currently in idle mode, skip
this step.
 
-
The system displays the following:
Tap FULL after you have topped up with fuel
Tap ''OK'' to save your settings. The fuel bar shows full:
4.11. Displa y brightness
You have different options on the control panel for setting the brightness of the display. Thanks to the
integrated ambient light sensor, the control panel can adapt the display brightness automatically.
4. 1 1. 1.
Tap the screen (if it is still in idle mode) to leave idle mode. If the display is not currently in idle mode, skip
this step.
 
-

brightness"
4. 1 1. 2.
Tap the screen (if it is still in idle mode) to leave idle mode. If the display is not currently in idle mode, skip
this step.
 
-
brightness"
Set the desired display brightness by tapping the
label. The system saves the changes immediately.
!
NOTE: If automatic brightness adjustment is active, this option is deactivated.
4. 1 1. 3.
You can increase or decrease the display brightness in idle mode to save energy. When you touch the
keypad, the display brightness is increased to the default value.
To set the display brightness in idle mode, proceed as follows:

S et ti ng auto m ati c br i ght ne s s ad ju st m ent
 
''Automatisch OFF/ON''
S et ti ng a ctiv e d is pl a y b r ight n e s s
 
S et ti ng t he di sp l a y b rig ht n es s in i dl e mod e
72

"Display options"
.

. "Display options"
symbols next to the "Brightness active"
and/or

"Display

"Display