Quantum Rehab Q-Logic 2 Instructions De Fonctionnement page 18

18
Main Menu
Handcontrol Settings
System Settings
Figure 2D. Menu Screens
To change units of measurement:
1. Push the On/Off and Mode Select Lever up once to power on the
chair and the controller.
2. Push the Menu button to access the Main Menu screen. See figure 2B.
3. Use the joystick to highlight the Handcontrol Settings option, then push
the joystick right to select that function. See figure 2B.
4. Use the joystick to highlight the Sound & Display option, then push the
joystick right to select that function.
5. Use the joystick to highlight the Measurement System option, then
push the joystick right to select that function.
6. Use the joystick to highlight the Max option, then push the joystick
right to select that function. See figure 2B.
7. Push the joystick left to select the ESC option and return to the Sound
& Display menu. See figure 2B.
8. Press the Menu button to return to drive mode.
To change the language choice:
1. Push the On/Off and Mode Select Lever up once to power on the
chair and the controller.
2. Push the Menu button to access the Main Menu screen. See figure 2A.
3. Use the joystick to highlight the Handcontrol Settings option, then push
the joystick right to select that function. See figure 2A.
4. Use the joystick to highlight the Sound & Display option, then push
the joystick right to select that function.
5. Use the joystick to highlight the Language option, then push the
joystick right to select that function.
6. Push the joystick up until the desired language is displayed. See
figure 2A.
7. Push the joystick left to select the Esc option and return to the Sound
& Display menu.
8. Push the Menu button to return to drive mode.
System Setting
Rest Distance
Rest Distance
Rest Trip