Speed Adjustment Knob; Keypad; Horn Button; Menu Button - Quantum Rehab Q-Logic 2 Instructions De Fonctionnement

Speed Adjustment Knob

The speed adjustment knob is used to control the speed of the power
chair.
To change the speed:
1. Push the On/Off and Mode Select Lever up once to power on the chair and
the controller.
2. To increase your speed, turn the speed adjustment knob up.
3. To decrease your speed, turn the speed adjustment knob down.

Keypad

The keypad is located directly in front of the joystick. It contains the
components that you will use to control your power chair.

Horn Button

The horn button activiates a warning horn.

Menu Button

The menu button is used to accesss user accessibility features such as
trip odometer reset and time set.
Key 1 and Key 2 Select Buttons
The key 1 select button is used to quickly and easily select drive profile
1. The key 2 select button selects the Seat. Contact you Quantum Rehab
Provider with any questions.
NOTE: If your Q-Logic 2 Controller is equipped with a lighting system,
the menu button and key 1/key 2 select buttons will be replaced with a
light button and left/right turn indicator buttons.

Light Button

The light button controls the front headlights and rear running lights.
To operate the lights:
1. Push the On/Off and Mode Select Lever up once to power on the
chair and the controller.
2. Press the light button once to activate the front headlights and rear
running lights.
3. Press the light button again to turn off the lighting system.
11