i-tec C31DUAL4KHDMI Mode D'emploi page 8

EN
INTRODUCTION
Thank you for purchasing i-tec USB-C Dual HDMI Adapter, which allows you
to easily connect up to two monitors, TVs or projectors with HDMI interface
to a laptop, tablet, PC or smartphone with USB-C or Thunderbolt 3 interface.
Max. resolution for two HDMI monitors is 4K@30Hz, for one HDMI monitor is
4K@30Hz.
Note:
For Apple users: This adapter has the MST function (2 monitors in extended
mode), which is not supported by the operating system macOS currently.
For Windows users: MST technology in the Windows OS allows connecting two
monitors simultaneously - in the advanced mode (different content on connected
monitors) and in the mirroring mode (same content on connected monitors). To
set up two monitors, setting of the MST mode in some hardware combinations
requires using of both the Windows control utility and the control panel for the
Intel HD Graphics.
PACKAGE CONTENTS
• i-tec USB-C Dual HDMI Adapter with cable (30 cm)
• Quick Start
SPECIFICATION
• 1x USB-C connector
• Graphic interface: 2x HDMI:
- max. resolution 3840x2160@30Hz when connecting single monitor
- max. resolution 3840x2160@30Hz when connecting two monitors
• Mode: Mirror, Extend and Primary display
• Supported colours 16 / 32 bit
• Power supply from USB-C or Thunderbolt 3 bus; max. 15W
• Chipset: STDP4320
• OS: Win 10 32/64bit, macOS X 10.10 and higher, Android, Chrome OS.
Requires USB-C or Thunderbolt 3 bus.
• Product dimensions: 70 x 60 x 15 mm
• Product weight: 60 g
SYSTEM REQUIEMENTS
Requires a USB-C interface with support for the "HDMI Alternate Mode" or
Thunderbolt 3 port – now Windows 10 32/64bit, macOS X, Chrome OS and
Android 6 (Google) with Intel Broadwell Processors and R51 and higher. macOS
does not support MST (2 monitors in the extended mode).
8
Quick Start / USB-C DUAL HDMI ADAPTER